Custom cables


Because we are brand-independent, we always select the best connector for your application. This also applies to the further finishing of the cable, such as the type of wire, sheathing or marking. Pure customisation for an optimal end product, where no cable leaves the house without being tested. That is how we do it at MCAP.

In the more than thirty years of our existence, we have made cable assemblies with a huge variety of connectors. For almost every quality brand we have the right tools and know the finishing methods, such as Molex, JST, TE/AMP, JAE, 3M, Hirose, Harting, Souriau, Binder, Phoenix, Harwin, ODU, Lemo, Stäubli, Neutrik, ITT Canon, Glennair, Lumberg, FCI, Z&F, Fischer, Hirschmann, Würth and Telegärtner.

Below you can find a selection of the possible applicable connector types from various manufacturers. Click on the link for more information.

Need custom made cables?

Contact us


Therefore, it is very easy for us to adapt to your requirements or advise you, brand-independently, on which brand and type of connector, cable and wire, sheathing and marking is best for your application.


We help our customers with cables for various applications. From data networks to industry and from medical applications to space travel. We work automatic stripper/crimpers to machine contacts on a wire. That is why our production facility is geared towards rapid production to the highest quality standards, with no cable assembly leaving the house without a test.

Molex Micro-Fit

The Molex Micro-Fit family of board-to-board, wire-to-board and wire-to-wire connectors withstands operating temperatures up to 125°C. The pitch of this connector is 3.00mm and has a maximum of 12 circuits as a single row and 24 circuits as a double row. The Micro-Fit connector series is suitable for wire gauges from AWG30 to AWG18 and can be used up to currents of maximum 8.5A.

Challenge us …


The Harwin Gecko M80 connector series is a comprehensive range of wire-to-board and wire-to-wire connectors. The Gecko M80 series is available with different configurations for power, signal and coax. There are single-row and double-row versions, with wire gauges ranging from AWG28 to AWG12. The version pictured is a 14×2 position female connector with jack screws and 2 power contacts AWG12. This Gecko M80 connector is suitable for currents up to 20A and 14 contacts AWG22. The connector can be used in environments of -55°C to +125°C.

Need Info?


Molex PicoBlade is a wire-to-board and wire-to-wire connector system with a pitch of 1.25mm. With its design flexibility, PicoBlade is an ideal connector for a wide range of applications and industries. The PicoBlade connector series saves approximately 45% pcb space compared to typical 2.00mm wire-to-board systems. It is a single-row connector system with variations from 2 to 15 circuits. We process the PicoBlade connector series with wire gauges from AWG28 to AWG26.

Can we help you?


TE’s AMPMODU Mod IV and V connector family consists of a series of rugged and reliable wire-to-board connectors on a modular .100″ x .100″ (2.54 x 2.54 mm) grid. The housings are available in single row up to 36 circuits and double row up to 72 circuits, with or without polarization. We process the AMPMODU connector series with wire gauges from AWG30 to AWG20 and can be used up to current ratings of up to 3A.

Questions about this?


The Molex KK 254 connector series is suitable for board-to-board and wire-to-board applications with signal or low power. The KK-254 family offers design flexibility and is a cost-effective solution for a wide range of applications. The pitch is 2.54mm and the connectors are available in variants of 2 to 36 circuits. We process the KK 254 connector series with wire gauges from AWG24 to AWG22 and it can be used up to currents of up to 4A.

More info?


The JST ZH wire-to-board connectors have a pitch of 1.5mm. The ZH connectors consist of one row with variations from 2 to 13 circuits. For easy connection, the guide lugs on the housing allow visual confirmation of the contact lock. We process the ZH series of connectors with wire gauges from AWG28 to AWG26 and they can be used for currents up to 1A.

Challenge us …


D-sub connectors are compact connectors especially designed for high density applications. Available from 9 to 50 circuits and the HD version from 15 to 104 circuits. D-SUB connectors are ideal for applications such as computer peripherals and industrial instrumentation. The accompanying protective caps are available in both plastic and metal with various types of locks. The wire gauge of D-SUB connectors varies from AWG28 to AWG 20.

What do you want to know?


The Molex Mizu P25 series of wire-to-wire and wire-to-board connectors was the first miniature connector to have an IP67 certification, making it dustproof and waterproof. The connector is available as 2, 3 or 4-circuits and has a 2.5mm pitch. The Mizu P25 is suitable for wire gauges of AWG22 and currents of up to 3A.

A question about this?


The JST VH series of small wire-to-board connectors is used for signal and power connections in consumer electronics. The VH connector has a pitch of 3.96mm and is available in versions from 2 to 11 circuits. The VH series is suitable for wire gauges from AWG22 to AWG16 and – depending on the contact diameter – for currents up to 10A.

Need more info?


The JST PH series of small wire-to-board connectors is designed to meet the demand for the high-density connection of internal connections on printed circuit boards. It is compact, highly reliable and low cost. The pitch of this connector is 2mm and it is available from 2 to 16 circuits. Suitable for wire g auges up to AWG24 and currents up to 2A.

More info needed?

For all these options, MCAP can help you with the optimum connector to the best cable. This is due to our years of experience and our brand independence. During your design stage, contact us as soon as possible and together we will make the best choice for you.



Together with you, we look for the cable or fiber optic connection that best fits your specific circumstances.

Challence us